Free Shipping

Overview and Specifications:

Product Attribute
Model Number : LSB3G1

Power W-CDMA980/2100 Mobile Phone Repeater


W-CDMA980 with LCD Cell Phone Signal Booster Kit captures weak mobile signals through a high gain outdoor antenna and boost the indoor 3G signals. LSB3G1 mobile repeater increases coverage up to 1000 square meters. LSB3G1 wise repeater will give you guaranteed signal coverage for your home, office, cabin, warehouse or facility, especially the signal dead zones.


Frequency3G/W-CDMA: up link 1920-1990MHz; down link2110-2180MHz



Max Output Power+23dBm/±3DBM Total power



Connector Type: N-F

Compact DesignIndoor Use

Operating Temperature-10℃-60℃

Power SupplyAC 110/220V

Coverage Area: 1000m2


Package size36*28*22cm

Package weight3kg


W-CDMA980   1pcs

Outdoor antenna 1pcs

Indoor antenna 1pcs

Cable 10 meters 1pcs

Adapter 1pcs

Installation Method:

1. Find the strongest direction and position of the received signal for mobiles at the top or the periphery of the building, as the location for installing the outdoor antenna, pay attention that the location should be paid to lightning protection. The installation height should not be higher than the lightning protection network of the building. If it is higher than the lightning protection network. If it is necessary, install a lightning rod 1 meter above the outdoor antenna and ground it well.

2. After selecting the appropriate location, fix the outdoor antenna to the wall or bracket.

3. Select an appropriate location in the relevant indoor location (close to the power supply and the outdoor antenna end, rain-proof, sunshine-proof and ventilation is best location) install indoor straight machine, and fixed to the wall or bracket.

4. Lead the outdoor antenna to the ‘BTS’ (outdoor) interface, and the connection between the outdoor antenna and the amplifier is completed.

5. After defining the indoor antenna installation position, fix the antenna.

6. The indoor antenna connected to the amplifier, one port connecting to the indoor antenna interface, and the other port connecting to the repeater’s ‘MOBILE’ (indoor) port.